Nautilus NH-1800 Operator's Manual page 133

NH-1800
6.8.6 Connect timer
Accessing the CONNECT TIMER
Fig. 6.60 CONNECT TIMER
Function Description
The CONNECT TIMER function is used to set the waiting timer during connecting to the host. After
powering on the machine, the machine will try to connect to the host. However when the machine
fails to connect to the host, it will wait for a while and will attempt to connect again. This function is
used to set the waiting time. The factory default is 60 second.
1) Select the 'HOST SETUP' in the
OPERATOR FUNCTION menu.
2) Select the 'CONNECT TIMER' in the
HOST SETUP menu. After inputting
the timer parameter, press "ENTER".
6 - 90
6. Operator Functions