Set Up Your Television; Set Up Your Television - Introduction; Placement; Handling - Bang & Olufsen BeoVision Avant-55 User Manual

Set up your television

Set up your television – introduction
The television must be set up by qualified service personnel according to the guide for
the stand or bracket. The television has several placement options. Guidelines for
placement and connection must be followed.
To ensure proper ventilation, allow enough space around the screen. At overheating
(flashing standby indicator and an on-screen warning), switch the television to standby,
do not disconnect from the mains, in order for the television to cool down. You cannot
operate the television during this time.
WARNING! Do not lift or otherwise move your television physically when it is mounted
on the floor stand. It could cause the TV screen to break. Contact your retailer.
If your television is mounted on the table stand, make sure it is placed on a table that can
handle the heavy weight of the television and the table stand.

Placement

The television has several placement options.
Refer to www.bang-olufsen.com for available stands and wall brackets or contact your
Bang & Olufsen retailer. Depending on your television size, different stands are available.
Due to the weight of the television, any moving or lifting of the television should be
performed by qualified personnel – using the proper equipment.

Handling

The television is not designed to stand on its own. It must be supported until mounted
either by the packaging or the transportation feet. To prevent injury, use Bang & Olufsen
approved brackets or stands only!

Stands and wall brackets

11