Bang & Olufsen BeoVision Avant-55 User Manual page 15

outlet.
The supplied plug and mains cord are specially designed for the product. Do not change
the plug, and if the mains cord is damaged, you must buy a new one from your Bang &
Olufsen retailer.
 Mains supply
Connection to the mains supply.
STAND
For connection of a motorised stand or wall bracket. Press the red button in the on-
screen help and find 'Adjust the stand' for information on how to calibrate a floor stand
or wall bracket.
PUC 1-3 (A+B)
For IR control signals to external products connected to an HDMI IN socket. Allows you
to control non-Bang & Olufsen products with your Bang & Olufsen remote control.
MIC
For connection of a calibration microphone only, to be able to calibrate connected
speakers automatically.
PL1-4 (Power Link)
For connection of external speakers in a surround sound setup. Press the red button in
the on-screen help and find 'Connect speakers to the television' for more information.
L/R IN
Left and right line input.
HDMI IN 1-2
The High Definition Multimedia Interface allows you to connect many different sources,
such as set-top boxes, multimedia players, Blu-ray players, or a PC.
USB ()
For connection of a USB device to browse digital photos, video or music files.
 Ethernet
For connection to the Internet. For access to the Internet, Smart TV, software updates
and PUC downloads.
Make sure the cable connection between the product and the router does not exit the
building to avoid contact with high voltage.
It is strongly recommended that you set your television to update system software
automatically, press the red button in the on-screen help and find 'Auto system updates'.
AERIAL
Not in use.
15