Set Up Your Television - Bang & Olufsen BeoCenter 6 Reference Book

36
For information about how to fasten
and run the cables on the rear of the
television, refer to page 38.
For further information about the
socket panel, refer to page 40.
Downloaded from ManualsNet.com

Set up your television

Handling your television
– Avoid placing your television in direct sunlight
or direct artificial light, such as a spotlight, as
this may reduce the sensitivity of the remote
control receiver. Also if the screen is overheated,
black spots may appear in the picture. These
spots disappear again, once the television cools
down to normal temperature.
– To avoid injury, use Bang & Olufsen stands or
brackets only.
– Make sure that the television is set up, placed
and connected in accordance with these
instructions.
– The television is developed for indoor use in dry,
domestic environments only. Use within a
temperature range of 10–40°C (50–105°F).
– Do not place any items on top of the television.
– Always place your television on a firm and
stable surface.
– Do not attempt to open the television. Leave
such operations to qualified service personnel.
Overview of socket panels
1 Cover for fastening bracket for the optional
stand and wall bracket. Pull out at the bottom
to remove the cover.
2 Main socket panel. Refer to page 40 for further
information.
3 Cover for DVI socket for connection of a
computer. Refer to page 41 for further
information.
4 Cover for main socket panel. Pull out at the
bottom to remove the cover.
5 Cover for optional card reader for access to DVB
programs.
6 Cover for camera and headphones sockets.
Push in to open, push again to close.
7 Cable groove. It is important that the cables are
lead through the groove and tied with a cable
tier, as the cables can otherwise be tugged free
of the sockets. Refer to page 38 for further
information.
search engine
If you have a motorised stand, leave enough space
around the television to allow it to turn freely. The
television can also be turned by hand.
1
2
3
4
5
6
7