Bang & Olufsen BeoVision Avant-55 User Manual page 65

Download PUC tables – introduction
In the Download more menu, you can download PUC tables either online from the
Internet or from a connected USB device. The PUC tables enable you to operate non-
Bang & Olufsen products with the Bang & Olufsen remote control.
If you have more than one connected USB device, you must first select the desired USB
device.
You can search for peripheral units by entering the connected product's name or you can
browse for peripheral units by brand name.
If your connected equipment is not in the download list, there is currently no control
solution for it and you must select Unsupported source. You will not be able to operate
your equipment with your Bang & Olufsen remote control. You can inquire with your
Bang & Olufsen retailer about support of sources.
Browse for PUC tables
Browse for available peripheral units.
1. Highlight a brand name and press .
2. Highlight one or more peripheral units from the list brought up and press the
centre button to select them.
3. Select Download to download the selected PUC tables.
4. Repeat the procedure, if you wish to download PUC tables for other brands.
Search for PUC tables
Search for peripheral units.
1. Enter the connected product's name or brand name and press the centre
button.
2. Highlight a peripheral unit from the list brought up and press the centre button
to select it. Repeat the procedure if you wish to download more PUC tables.
3. When you have selected the relevant units, press the green button to be able to
download them.
4. Select Add more if you wish to add more units or Download to start
downloading.
Transfer all PUC tables
If you download PUC tables from a USB device, you can also select Transfer all to
transfer all the PUC tables saved to the television provided that there is enough memory
available.
Manage existing PUC tables
Update PUC tables
Check if there are any updates available for your currently downloaded PUC tables.
1. In the PUC management menu, bring up Manage existing.
2. Press  and press the green button to check for updates.
3. In the list of available updates, use the arrow buttons to highlight the PUC tables
you wish to update and press the centre button. If a table you do not wish to
update is already selected, highlight it and press the centre button to deselect it.
4. To bring up information on the selected tables, highlight View release notes and
press the centre button. Press the centre button again to leave the release
65