Connect Digital Sources - Bang & Olufsen BeoVision Avant-55 User Manual

SAT 1-2 (Satellite)
Not in use.
HDMI IN 3-4
The High Definition Multimedia Interface allows you to connect many different sources,
such as set-top boxes, multimedia players, Blu-ray players, or a PC. HDMI IN 4 is for
connection of MHL compliant devices.
USB x 2 ()
For connection of a USB device to browse digital photos, video or music files.
COMMON INTERFACE x 2
Not in use.

Connect digital sources

Connect external HDMI sources, such as a set-top box, computer or game console. All
products connected to the television can be configured. For more information, press the
red button in the on-screen help and find
Depending on the product you connect to the television, different cables and maybe also
adaptors are needed. If you have more than one type of products that need a PUC
socket, you must buy an extra PUC cable. Cables and adaptors are available from your
Bang & Olufsen retailer.
Connect a digital source
1. Connect the cable to the appropriate socket on the digital product.
2. Run the cable to an HDMI IN socket on the television.
3. To enable operation of the digital product with your Bang & Olufsen remote
control, connect an IR-transmitter to one of the PUC sockets and attach it to the
IR-receiver of digital product. Press the red button in the on-screen help and find
'IR-transmitters' for more information.
4. Follow on-screen instructions to configure the source.*
*When selecting Game console as source, the picture mode Game is activated as default
setting. You can change this setting temporarily in the Picture menu. Press
the red button in the on-screen help and find
Connect a camera
1. Connect the cable to the appropriate socket on the camera.
2. Run the cable to an HDMI IN socket on the television.
3. Follow on-screen instructions to configure the source.
'Set up a source'.
'Picture settings' for more information.
16