Aztec Length 1, Length 2 Programming Instructions - Datalogic Magellan 1100i Product Reference Manual

Aztec — continued

Aztec Length 1, Length 2 Programming Instructions

1. Scan the START barcode.
2. Scan either the Set Length 1 or Set Length 2 barcode.
3. Turn to
Scan the END barcode.
START / END
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 2
Product Reference Guide
Alpha-Numeric Pad and scan the four digits (zero-padded) representing the length.
For Aztec labels, only the data characters are included in
the length calculations.
Any value set higher than 3700 will be considered to be
2710.
NOTE
PROGRAMMING BARCODES
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 2710
2D Symbologies
167