Aztec Length 1, Length 2 Programming Instructions - Datalogic Magellan 1100i Product Reference Manual

Aztec — continued

Aztec Length 1, Length 2 Programming Instructions

1. Scan the START barcode.
2. Scan either the Set Length 1 or Set Length 2 barcode.
3. Turn to
Scan the END barcode.
START / END
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 2
Product Reference Guide
and scan the four digits (zero-padded) representing the length.
Alpha-Numeric Pad
For Aztec labels, only the data characters are included in the length cal-
culations.
Any value set higher than 3700 will be considered to be 2710.
NOTE
PROGRAMMING BARCODES
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 2710
2D Symbologies
169