Cut; Copy - Siemens SIMATIC 505 User Manual

40 • • • • 3 - 505 SoftShop Basics
Window Feature Function

Cut

Removes the selection from the program and places it on the
clipboard.

Copy

Copies the selection and places it on the clipboard.
Paste Inserts clipboard contents into the program at the cursor
location.
Paste With Rewire Inserts clipboard contents into the program at the cursor
location and allows the user to re-address any addressable items
contained in the clipboard.
Undo Resets the networks/addresses in a segment to their original
data.
The clipboard referred to is the standard Windows clipboard. Refer to
your Windows User's Guide for more information.
To select the information you want to cut or copy, click, hold and drag
the pointer over the desired area. Selected items are highlighted with a
different color than your normal workspace color.
If you want to select all logic in the current window, select Select All
from the Edit menu.
Each of three editing commands, described in detail in the following
paragraphs, can be accessed several ways.
Cut
To use the cut feature:
1. Select the information you want to cut by highlighting the range
instructions or networks/addresses of (SF) lines to be cut.
2. Click and hold down the left mouse button on the item, or network or
(SF) lines to be cut, then drag the mouse to the end of the item range
or network or (SF) lines to cut.
3. Cut your selection to the clipboard with one of the following:
•
Click on the toolbar or
•
Select Cut from the Edit menu
NOTE If the start and ending networks/addresses or (SF) lines are
known, then the cut from and cut to range can be entered directly into the
Cut Range dialog box. If a partial network is selected, the Cut Range
dialog box is not displayed. The items selected are cut without warning.
Figure 3.20
4. Select OK.
Result: The range of networks/addresses or (SF) lines displayed are
cut out of the program and placed into the clipboard.
Copy
To use the copy feature:
1. Select the information you want to copy by highlighting the range
instructions or networks/addresses or (SF) lines to be copied.