Print Logic And Sfs - Siemens SIMATIC 505 User Manual

Print Logic and SFs

Click the Logic and SFs button to print the following:
• All logic, ladder, SFS and SFP
• Selected logic ladder, SFS or SFP
• Selected ladder in address or network mode
• Selected Special Function lines
• Inline Xref
• Ladder with Addresses, Tags, Descriptions, or Headers
• Multiple or single networks/addresses per page
The Print Logic and SFs dialog box determines which items are printed.
(Figure 3.13).
Figure 3.13
Click the All check box to print the entire range of the item selected. To
print a selection, deselect the All check box and enter a range in the
associated edit box.
If you selected ladder to print, the ladder reference numbering can be
either PLC memory address mode or network address mode. The selected
radio button below ladder range determines which mode is printed. The
Network address or PLC Memory Address is printed on the top left or
right of ladder and can be disabled to not print at all. The selection is
made in the Network/Address Marker field.
When selecting Networks/Addresses per Page as Single or Multiple, use
the following information. When printing Single Networks/addresses per
Page, each network begins on a new page. When printing Multiple
Networks/Addresses per Page, as many networks/addresses that can fit on
a single page will be printed. However, if the network is not the first
network on the page and the network is broken across more than one page
but can fit on a page and if it would start a new page, then the network
begins on a new page. The intent is to keep the entire network on one
page whenever possible.
3 - 505 SoftShop Basics • • • • 31