Plc Type Setup (Offline) - Siemens SIMATIC 505 User Manual

PLC Type Setup (Offline)

64 • • • • 5
The setup and configuration process begins with PLC Type Setup. You
must tell 505 SoftShop what processor you are using before you can
configure the processor.
Valid PLC types are:
•
Simatic 520 revision 1101.
•
Simatic 520c revision 1101 and 1102.
•
Simatic 525 revision 1102 and 1104.
•
Simatic 530 revision 1102, 1104, and 1108.
•
Simatic 530c revision 1104, 1108, and 1112.
•
Simatic 535 revision 1104, 1108, and 1112.
•
Simatic 560 revision 2120.
•
Simatic 560/565 revision 2120.
•
Simatic 560T revision 2820.
•
Simatic 560/565T revision 2820.
•
Simatic 545 revision 1101, 1102, 1103, 1104, 1105 and 1106.
•
Simatic 555 revision 1101, 1102, 1103, 1104, 1105, and 1106.
•
Simatic 575 revision 2102, 2103, 2104, 2105, and 2106.
To set up the PLC:
1. Select PLC Type Setup from the File menu.
Result: The PLC Type Setup dialog box appears (Figure 5.1).
Figure 5.1
2. Note, to access a 545-1101 extended memory offline the
extended memory check box must be selected at this point, as
shown in figure 5.1a.
Figure 5.1a
3. Select the appropriate PLC Type and PLC Memory Size. A
detailed explanation of each setup option is described on the
following table (Table 5.1). If shared documentation is to be
associated with the new program it must be setup at this stage
see Shared Documentation.
Simatic 505 SoftShop