Cut Out The Hinged Cover For 3Rw5 Hmi - Siemens SIRIUS 3RW52 Manual

3.4.9

Cut out the hinged cover for 3RW5 HMI

Requirements
Note
Accessories.
Hinged covers with correctly sized cutout can be ordered as an accessory.
● Detached hinged cover without cutout
Replacing the hinged cover of the 3RW52 soft starter (Page 58)
● Solid, sharp knife
Procedure
● Make sure that you know which 3RW5 HMI you require the cutout for.
Cutout 1: 3RW5 HMI Standard
Cutout 2: 3RW5 HMI High Feature
● Cut out the required cutout along the perforated line on the rear of the hinged cover using
a solid, sharp knife.
● Deburr the cut edges of the hinged cover.
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
Mounting and dismantling
3.4 Installing / mounting / removing 3RW5 HMI
57