Hitachi HF-W100E/IoT User Manual page 6

SAFETY INSTRUCTIONS (Continued)
< CAUTION>
 If the equipment drops or is tipped over, personal injury may result. Pay full
attention when transporting the equipment.
 Make sure you do not catch or hit your fingers to cause personal injury when
unpacking or carrying the equipment.
 There may be a danger of injury or damage to this equipment. Do not use this
equipment for purposes other than its original usage.
 Do not touch this equipment directly during operation or immediately after shutting
off the power because the equipment may become hot. There is a fear of burn.
Install the equipment where the user does not touch the equipment in operation
directly by hand.
 This equipment alone cannot guarantee the system safety. In order to ensure
sufficient safety of your system even when this equipment should fail, malfunction,
or have program bugs, you must add systemic protections such as building external
protective/safety circuits to facilitate safety measures to prevent personal injury and
serious accidents.
 An emergency stop circuit must be provided externally to this product.
Disregarding this rule may result in a damage to the equipment or a hazard to the
user if this product fails.
 Perform the operation such as the change pf the program, the forced output, and
stop during online (during system operation) after confirming the safety thoroughly.
Otherwise, it may result in a damage to the equipment or an accident by wrong
operation.
S-3