Table of Contents
Advertisement
2. If a window is displayed to indicate that admin rights are required, click OK to
obtain the admin rights. If the User Account Control window is displayed, click
Yes. When the admin rights are granted, click the icon again, and then click PLC
Configuration.
3. The System Configuration dialog box is displayed. Click the Startup tab, select
only the Start the PLC with the basic system service checkbox, and then click
OK. Make sure that you clear the Start the RTE basic systemservice when
booting checkbox.
Note: To cancel the PLC auto start, clear Start the PLC with the basic system
service checkbox, and then click OK.
Then, PLC will start automatically when the device starts next time.
3-11
3. CREATING A PLC PROGRAM
Advertisement
Table of Contents
