Updating The Network Driver - Hitachi HF-W100E/IoT User Manual

2.3 Updating the Network Driver

In the factory settings of HF-W100E/IoT, the Intel® Network driver is used for the built-in
LAN (LAN A), and the CODESYS EtherExpress driver is used for the built-in LAN (LAN B
and LAN C) to support EtherCAT.
To use the built-in LAN (LAN A) as EtherCAT, or to use the built-in LAN (LAN B and LAN
C) as Ethernet (TCP/IP), update network drivers. To update a network driver, follow the
procedure below:
NOTE
This product may record the following events in the event log during update the
CODESYS EtherExpress driver to the Intel® Network driver. These events do not
affect the operation of the system.
Event ID
10317
(*1) shows the network adapter name.
(*2) shows the GUID.
1. Log on to the computer as an administrator account.
2. Open Control Panel.
• If the OS is Windows® Embedded Standard 7, click Start, and click Control Panel.
• If the OS is Windows® 10, right-click Start, and click Control Panel from the menu.
3. Click Start > Control Panel > System and Security. Click the System icon, and then
Device Manager.
4. The Device Manager window appears. Click the View menu, and select Devices by
connection.
5. If the OS is Windows® Embedded Standard 7, expand ACPI x64-based PC > Microsoft
ACPI-Compliant System > PCI bus.
If the OS is Windows® 10, expand ACPI x64-based PC > Microsoft ACPI-Compliant
System > PCI Root Complex.
Source Type
NDIS Error Miniport (*1), {(*2)}, had event Fatal error: The
miniport has detected an internal error
Description
2-21
2. SETUP