Termination Of Screw Terminals - Mitsubishi Electric MELSEC FX2NC-16MT-D/UL Hardware Manual

FX2NC Series Programmable Controllers
3.13

Termination of screw terminals

Cables terminating at a screw terminal of an FX
lated crimp terminals, see example shown. Terminals screws should be tightened to between
0.5 to 0.8 N m. Screw terminals must be secured to prevent a loose connection from causing a
malfunction.
Figure 3.14:
• When one wire is connected to one terminal.
6.2mm
(0.24")
or less
• When two wires are connected to one terminal.
6.2mm
(0.24")
or less
Caution
Make sure to turn OFF the power before starting any wiring work.
φ 3.2
(0.13")
6.2mm
(0.24")
or less
φ 3.2
6.2mm
(0.13")
(0.24")
6.3mm
or less
(0.25")
or more
and FX product should be fitted with insu-
2N 0N
φ 3.2
(0.13")
Terminal Terminal
φ 3.2
(0.13")
6.3mm
(0.25")
or more
Terminal
Installation notes 3.
Terminal Crimp
screw terminal
Terminal Crimp
screw terminal
3-19