Table of Contents
Advertisement
Show device displays information about each I/O device. Polling
1
checks the XMI bus for device configurations. The next line contains
three columns. The first column contains the console device name. The
second column displays the name of the device given by the device con-
troller. The third column shows the device type.
In the boot command, -fl indicates that additional command parame-
2
ters follow, 0 indicates no shadow set, 4 is the booting system root on
the cluster system disk, 0 is the VMB option, du is the device code of
the boot device, a is the boot device controller designation, and 20
specifies the unit number of the boot device. The 13 is the HSC con-
troller node number that the boot device is connected to, 0 is the chan-
nel number, 2 is the XMI node number, and 0 is the I/O channel
number.
With the set enable_audit environment variable on, audit trail
3
messages appear during booting.
For more information:
VMS Upgrade and Installation Supplement:
VAX 7000-600 and VAX 10000-600 Series
Booting 4-39
Advertisement
Table of Contents
