Show device displays information about each I/O device. Polling
1
checks the XMI bus for device configurations. The next line contains
three columns. The first column contains the console device name. The
second column displays the name of the device given by the device con-
troller. The third column shows the device type.
In the boot command, du is the device code of the boot device, a is
2
the boot device controller designation, and 31 specifies the unit num-
ber of the boot device. The 14 is the HSC controller node number that
the boot device is connected to, 0 is the channel number, 2 is the XMI
node number, and 0 is the I/O channel number.
The system boots the OSF/1 operating system.
3
The system displays information about the I/O subsystem reset,
4
memory, I/O bus adapters, configured devices, and network
configurations.
The operating system banner appears.
5
For more information:
DEC OSF/1 Guide to System Administration
Booting 4-37