Table of Contents
Advertisement
Show device displays information about each I/O device. Polling
1
checks the XMI bus for device configurations. The next line contains
three columns. The first column contains the device type and unit
number, node number, device channel number, XMI node number, and
I/O channel number, separated by periods. The second column displays
the name of the device given by the device controller. The third column
shows the device type.
In the boot command, dk is the device code of the boot device, a is
2
the boot device controller designation, and 100 specifies the hexadeci-
mal unit number of the boot device. The 1 is the node number, 0 is the
channel number, 2 is the XMI node number, and 0 is the I/O channel
number.
The system boots from the RRD42.
3
The system displays information about the I/O subsystem reset,
4
memory, I/O bus adapters, configured devices, and network
configurations.
The operating system banner appears.
5
For more information:
DEC OSF/1 Guide to System Administration
Booting 4-23
Advertisement
Table of Contents
