Sound Processors Fitting Quick Guide
STEP 1
Ensure that the abutment is secure and that the
area around it is clean.
STEP 4
Have the patient practice connecting/disconnecting
the dummy device, first on a snap trainer, then on
his/her abutment.
STEP 7
Baha 3 Sound
Baha 3 Power Sound
Processor (BP100)
Processor (BP110)
Explain how to use the on/off button, program
buttons and volume control and how to care for
the sound processor.
STEP 10
Specify which accessories are available;
discuss uses and the client's possible needs.
For more detailed information on fitting and fine tuning, see the Cochlear
STEP 2
Connect the Baha
3 Sound Processor (BP100 or
®
BP110) to the Baha Fitting Software, then connect it
to the patient's abutment. Use BC Direct to measure
the patient's direct bone conduction thresholds.
STEP 5
Let the client connect the sound
processor and adjust the volume control
to the most comfortable level (MCL).
STEP 8
Instruct the client on care and maintenance
of the abutment and abutment area.
STEP 11
Fill in the registration card. Explain insurance
terms and warranties.
Baha Fitting Software Guide.
™
STEP 3
Volume up and
down button
Adjust the Baha 3 Sound Processor (BP100
or BP110) based on the patient's comments.
Let the patient reset the volume if needed.
STEP 6
Take advantage of the Patient User Manual
to review the next 4 steps, this will familiarize
the client with the manual.
STEP 9
Review troubleshooting of the sound processor.
Describe how to change the battery and
mention the expected battery life.
STEP 12
Schedule a follow-up appointment.