Manual Feed; Exit Page Control - Xerox DocuMate 6710 User Manual

® ®
Xerox DocuMate 6710

Manual Feed

You can select either Automatic or Manual Scanning mode using the switch on the top of the
scanner. When manual feed is selected, the input tray will rise to its highest position.
When scanning a document manually, feed one sheet at a time. While using this mode, double
feed detection will be disabled.

Exit page control

When scanning a large stack of smaller pages, it is possible for them to become out of order in the
exit tray. In order to reduce the chance of this happening, the Exit Page Control can be installed.
1. Locate the holes on either side above the exit slot.
2. Angle the Exit Page Control to insert the tabs into one side, then the other.
3. The Exit Page Control is magnetised so that it can be lifted out of the way if necessary.
5-4
Loading Documents to Scan
User Guide