Inspections; Daily Inspections - YASKAWA JAPMC-CP3301-1-E Instructions Manual

4 Inspections

4 Inspections
Perform inspections and part replacements according to the information
that is provided in this section.

4.1 Daily Inspections

The daily inspection items are given in the following table.
Inspection Item
Installation
condition
Connection
conditions
RDY
indicator
RUN
indicator
ALM
indicator
Indi-
cators
ERR
indicator
BAT
indicator
M_ALM
indicator
*
MP3000-series MP3200/MP3300 Troubleshooting Manual
(Manual No.: SIEP C880725 01)
E-20
Description
Loose screws All screws and covers
or covers must be secure.
Loose termi- Screws must not be
nal screws loose.
Connectors must not
Connectors
be loose.
Separation
between Suitable gaps must
crimped ter- be maintained.
minals
Must be lit.
Check the
(Otherwise, there is
status.
an error.)
Check the Must be lit.
status in RUN (Otherwise, there is
mode. an error.)
Must not be lit.
Check the
(Otherwise, there is
status.
an error.)
Must not be lit.
Check the
(Otherwise, there is
status.
an error.)
Must not be lit.
Check the
(Otherwise, the bat-
status.
tery is low.)
Must not be lit.
Check the
(Otherwise, there is
status.
an axis alarm.)
Criteria
Tighten the
screws.
Tighten the termi-
nal screws.
Tighten the lock
screws on the
connectors.
Correct the gaps.
Refer to the rele-
vant manual.*
Replace the Bat-
tery.
Refer to the rele-
vant manual.*
Correction