Firmware Updates; Uno-S2 Keypad Diagnostic Menu - Russound CAV6.6-S2 Instruction Manual

INSTALLER

FIRMWARE UPDATES

UNO-S2 Keypad Diagnostics Menu
The Diagnostics Menu allows the installer to run
a diagnostic check on the keypad and to verify
the firmware version. The Diagnostics Menu also
contains the update firmware procedure for
updating the UNO-S2's firmware.
To access the Diagnostics Menu, press and hold
the Setup button on the right side of the keypad
until "DIAGNOSTICS" appears on the display. The
44
menus are outlined in the diagram below.
When finished, press and release the Setup but-
ton again (except for the Update Firmware where
the power must be cycled).
Note: Do not change Controller ID settings in
this menu. Controller ID is set in the Controller
Setup menu (see Controller Setup Menu on
page 73).