Firmware Updates; Uno-S2 Keypad Diagnostic Menu - Russound CAV66 1 Instruction Manual

INSTALLER

FIRMWARE UPDATES

UNO-S2 Keypad Diagnostics Menu
The Diagnostics Menu allows the installer to run
a diagnostic check on the keypad and to verify
the firmware version. The Diagnostics Menu also
contains the update firmware procedure for
updating the UNO-S2's firmware.
To access the Diagnostics Menu, press and hold
the Setup button on the right side of the keypad
until "DIAGNOSTICS" appears on the display. The
Press and
Hold
Setup Button
DIAGNOSTICS
BUTTON
TEST
Press button
to be tested
44
PORT ID
CONTROLLR
ID
Displays
Displays
Controller ID
Port ID
number
number
DISP
DISP
BLOCK
CHAR
Press button Press button
to display to display
character blocks
menus are outlined in the diagram below.
When finished, press and release the Setup but-
ton again (except for the Update Firmware where
the power must be cycled).
Note: Do not change Controller ID settings in
this menu. Controller ID is set in the Controller
Setup menu (see Controller Setup Menu on
page 73).
KEYPAD ID VERSION
Displays
Displays
current firmware
Keypad ID
version
number
DISP
ROW
Press button
to display
rows
UPDATE
FIRMW
Hold
PLAY
After update
cycle Power
Start
Update
Cycle Power
BG
COLOR
Select Amber,
Green, or turn
color Off