Russound CAV6.6-S2 Instruction Manual page 59

Numeric IR (cont'd)
a. Selected: Learned IR
(LrnIR)
i. LEARNED SRC –
(LnSrc)
b. Selected: Unassigned
(Unasg)
c. Selected: Default
(Deflt)
d. Selected: Macro:
i. MACRO -
(Macro)
ii. MACRO ID –
(MacID)
e. All Other Selections:
7. DEVICE CODE –
(DevCd)
8. KEY FUNCTION –
(KeyFn)
9. SUFFIX CMD –
(Sufix)
10. COMMAND TYPE –
(CmdTp)
a. Selected: Learned IR
(LrnIR)
i. LEARNED SRC –
(LnSrc)
b. Selected: Unassigned
(Unasg)
c. Selected: Default
(Deflt)
d. Selected: Macro:
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 8)
The numeric IR Prefix command is cleared. Procedure advances
to SUFFIX CMD (step 9)
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 8)
(To build macros, see Macro Editor page 65)
Macro loads a series of commands which are processed when
activated.
Enter the macro ID number. Menu advances to SUFFIX CMD (step 9)
Procedure advances to DEVICE CODE (step 7)
Source component code for IR control.
Select a function (Disc, etc.).
Tells the system whether a command will be issued after the
selection of the numerical value (e.g., 1, 2 Enter ). If "no," proce-
dure advances to SAVE CHANGES (step 13)
Select the type of source command (e.g., CD, TV, etc.).
Choose Learned IR if the pre-programmed IR code library does
not support the source component.
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 12)
The numeric IR Suffix command is cleared. Procedure advances
to SOURCE NUM (step 1)
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 12)
(To build macros, see Macro Editor page 65)
INSTALLER
INSTALLATION MENU
59