Fm Radio - MAJORITY Abbey BT Instruction Manual

Instructions Guide

FM Radio

Press the 'Standby/Mode' button (Ref.1) to switch to FM mode.
The first time you do this, the FM frequency "87.5 MHz" will be
displayed on the screen.
Fully extend the antenna (Ref.15)
To begin auto-scanning for available stations, press and release
the 'Scan' button (Ref.3). This will then start a scan up the
frequency band for available stations. Once the scan is complete,
the radio will play the first station it finds with good signal.
How to tune a specific frequency manually
To listen to a specific frequency, press and hold the 'Next' button
(Ref.9) to search up the bandwidth quickly and the 'Prev' button
(Ref.7) to search down quickly. It will stop searching when the
button is released.
To search slowly, press the 'Next' (Ref.9) and 'Prev' (Ref.7) buttons
multiple times rather than holding.
Stereo or Mono
In FM mode, press and hold the 'Info/Menu' button (Ref.6).
Use the 'Prev' (Ref.7) or 'Next' (Ref.9) buttons to scroll to "Audio
Setting" and press the 'Enter/Snooze' button (Ref.5) to select.
Use the 'Prev/Next' buttons (Ref.7 ) to scroll between setting
/9
FM mode as "Stereo Allowed" or "Forced Mono". Select your
choice with the 'Enter/Snooze' button (Ref.5).
11