Fm Radio And Set Up Preset For Fm Radio - MAJORITY Newnham CB3-DAB-WHT User Manual

Instructions Guide
FM Radio
Press the 'Power/Source' button (Ref.1) multiple times to switch
to FM. The first time you do this FM frequency "87.5 MHz" will
be displayed on the screen.
Fully extend the antenna (Ref.15).
To auto scan, press and release the 'Scan' button (Ref.6).
This will then start scanning up the frequency band and play
the first station it finds with a good signal.
To scan down the frequency band, press and hold the 'Scan'
button (Ref.6) for a few seconds.
How to tune a specific frequency manually
To listen to a specific frequency press and hold the 'Next'
button (Ref.8) to search forward quickly and 'Prev' button
(Ref.7) to search back quickly. It will stop searching when the
button is released. To search slowly press the 'Next' and 'Prev'
button (Ref.7/8) multiple times rather than holding.
•
6
IMPORTANT: Please make sure you have
extended the antenna (Ref.15) to its full
length. This will then enable you to rotate it
to get the best signal.