Instructions Guide Please note all (Ref.) refer to the Controls and Functions mapping guide on Pages 1-2 . Basic Operation Plug the power supply plug into the mains and the connector into the back of the system labelled DC IN (Ref .13) . Power Supply ON/OFF at back of system (Ref .12) .
Instructions Guide Instructions Guide DAB Radio Press the ‘Standby/ Mode’ button (Ref . 1 ) to switch to DAB Radio . On first use it will automatically scan all stations and save them . Fully extend the antenna (Ref .15) . To auto scan (if the unit hasn’t automatically done so, or shows no signal) press the ‘Scan’...
Page 8
Instructions Guide How to store a preset radio station Up to 10 preset stations can be set . To store a station that you are currently playing: Press and hold ‘Preset/Dimmer’ button (Ref .4) . “Preset Empty ‘1’”will show on the display, the number flashing . Press ‘Prev’...
Page 9
Instructions Guide FM Radio Press the ‘Mode’ button (Ref .1) to switch to FM . The first time you do this FM frequency “87 .5 MHz” will be displayed on the screen . Fully extend the antenna (Ref .15) . To auto-scan press and release the ‘Scan’...
Instructions Guide How to store a preset radio station Up to 10 preset stations can be set . To store a station that you are currently playing: Press and hold ‘Preset/Dimmer’ button (Ref .4) . “Preset Empty ‘1’” will show on the display, with the number flashing . Press ‘Prev’...
Page 11
Instructions Guide FM Sensitivity This is a measurement of how well the tuner can pick up signals . The lower the number (it’s usually in the range of 9 to 11), the better . Press and hold the ‘Info/Menu’ button (Ref .6) . To make your choice use the ‘Prev/Next’...
Instructions Guide Station Information for DAB and FM Radio DAB Radio Press the ‘Info/Menu’ button (Ref .6) repeatedly to show the different programme information . Bit Rate: Shows the data rate at which the signal is being transmitted . Bit Error Rate (BER): Provides details of the signal error rate . Channel and Frequency: Displays the station’s transmission channel number and frequency .
Page 13
Instructions Guide FM Radio Press the ‘Info/Menu’ button (Ref .6) repeatedly to show the different programme information . Signal Strength: Displays a signal bar with the strength of the current station . Time and Date: Displays the time and the date . Frequency: Displays the station’s transmission frequency .
Instructions Guide Clock and Date Setting Manually Setting the Date Ensure the unit is in working mode (i .e . listening to DAB/FM Radio) . Press and hold the ‘Info/Menu’ button (Ref .6) . Use the ‘Prev/Next’ buttons (Ref .7/9) to choose your option . Choose “SET TIME/DATE”...
Page 15
Instructions Guide Manually Setting the Time The time can be changed straight after changing the date . The hour will flash on the display screen . Using the ‘Prev’ (Ref .7) or ‘Next’ (Ref .9) buttons, press until the required hour is displayed .
Instructions Guide Dual Alarm Setting Alarm 1/Alarm 2 Setting Ensure the radio is in working mode (i .e . listening to DAB or FM Radio and not in standby mode) . Press and hold ‘Info/Menu’ button (Ref .6) . Use the ‘Prev’ (Ref .7) or ‘Next’...
Instructions Guide Alarm Sound, Snooze and Dual USB Ports Alarm Sound If the alarm is set to “DAB/FM” mode it will play DAB/FM Station . If there is no signal it will automatically revert to BEEPER . If two alarms are set, and ALARM 1 is sounding when ALARM 2 begins to sound it will automatically turn off ALARM 1 .
Instructions Guide Other Functions Sleep Setting This enables you to programme the radio to switch off at a selection of set times up to 90 minutes from activation . In working mode, press and hold ‘Info/Menu’ button (Ref .6) . Use the ‘Prev’...
Instructions Guide Display Brightness To change the display brightness, ensure the system is in standby . Press the ‘Dimmer/Preset’ button (Ref .4) to adjust the screen brightness . Press multiple times to view the different levels of brightness . System Reset Press and hold ‘Info/Menu’...
Technical Specifications and Warranty Technical Specifications Power Supply 100-240V AC INPUT 5V/2 .5A DC OUTPUT Mode FM 87 .5MHz DAB/DAB+ BAND III 5A-13F Output Power 2W X 2 Standby Mode Show Clock Black background white fonts, negative LCD Warranty All products come with a standard 12 month warranty . All items must be registered on www .majoritytech .co .uk for the warranty to be valid .
IMPORTANT SAFETY INFORMATION 1 . Read these instructions . ADDITIONAL WARNINGS 2 . Keep these instructions . Instructions are also The apparatus shall not be exposed to dripping or available for download at www .majoritytech . splashing and no objects filled with liquid, such as co .uk vases, shall be placed on apparatus .