Fm Radio - MAJORITY Knapwell User Manual

Instructions Guide
EN

FM Radio

Press and hold the 'Menu/Mode' button (Ref.2) multiple times to switch between DAB,
FM, and Bluetooth. The first time you switch to FM mode, the FM frequency '87.5
MHz' will be displayed on the screen.
Fully extend the pig-tail antenna (Ref.14), before scanning.
To scan for the available stations with good signal up the bandwidth, press
'Menu/Mode' button (Ref.2) to step into 'Menu' option, using the 'Next' or the 'Prev'
button, to find and select 'SCAN'. Press the 'Enter' button to confirm.
A full scan will automatically start up the frequency band. Once completed the next
available station with good signal will begin to play.
To scan through the frequency band, press and hold down the 'Prev' button (Ref.9)
for 2-3 seconds to search for the radio stations with good signal available.
How to tune a specific frequency manually
To listen to a specific frequency, press and hold down the 'Next' button (Ref.11) to
search up the bandwidth quickly. To search down the frequency band quickly, press
and hold down 'Prev' button (Ref.9). It will stop searching when the button is released.
To search slowly, press the 'Prev' or 'Next' (Ref.9/11) multiple times to search the
band. Each button press will search with 00.50 MHz up or down, the frequency band.
Stereo and Mono
While in FM Mode, press the 'Menu/Mode' button (Ref.2) to step into the 'Menu'
option. Select 'AUDIO' by pressing 'Prev' or 'Next' (Ref.9/11). Press the 'Enter' button
(Ref.13) to confirm. Press 'Prev' or 'Next' (Ref.9/11) again to switch between Stereo
and Mono mode. Press 'Enter' to confirm.
10