Instructions Guide Please note all (Ref.) refer to the Controls and Functions mapping guide on Pages 1-2 . Basic Operation Plug the connector into the back of the system labelled DC 5V (Ref .13) and the power supply into the mains if not already charged .
Instructions Guide Instructions Guide Standby To place the music system in standby mode, press and hold the ‘Power/Mode’ button (Ref .3) . To turn off fully, switch the button on the rear of the unit (Ref .12) to off and turn the power off at the mains .
Page 8
Instructions Guide The radio will display station information when you press the ‘Info/Menu’ button (Ref . 1 ) . Press it multiple times to view all information available (See page 10) . When you power up the radio again after switching off, it will automatically tune to the same station (DAB or FM) that was last selected .
Page 9
Instructions Guide How to store a preset radio station Up to 10 preset stations can be set . To store a station that you are currently playing: Press and hold the ‘Preset’ button (Ref .2) . “<1: (Empty)” will show on the display . Press ‘Prev’...
Instructions Guide FM Radio Press the ‘Power/Mode’ button (Ref .3) multiple times to switch to FM . The first time you do this, FM frequency “87 .5 MHz” will be displayed on the screen . Fully extend the antenna (Ref .11) . To auto-scan press and release the ‘Scan’...
Page 11
Instructions Guide How to tune a specific frequency manually To listen to a specific frequency, press and hold the ‘Next’ button (Ref .6) to search forward quickly and ‘Prev’ button (Ref .5) to search back quickly . It will stop searching when the button is released .
Instructions Guide Station Information for DAB and FM Radio DAB / DAB+ Radio Press the ‘Info/Menu’ button (Ref .1) repeatedly to show the different programme information . Bit Rate: Shows the data rate at which the signal is being transmitted . Bit Error Rate (BER): Provides details of the signal error rate .
Page 13
Instructions Guide FM Radio Press the ‘Info/Menu’ (Ref .1) button repeatedly to show the different programme information . Signal Strength: Displays a signal bar with the strength of the current station . Time and Date: Displays the time and the date . Frequency: Displays the station’s transmission frequency .
Instructions Guide Clock and Date Setting Manually Setting the Time Ensure the unit is turned on . Press and hold the ‘Info/Menu’ button (Ref .1) . Use the ‘Prev/Next’ buttons (Ref .5/6) to choose your option . Choose “Time/Date” and press the ‘Enter’ button (Ref .7) . The hour will then flash on the display screen .
Page 15
Instructions Guide Manually Setting the Date The date can be changed straight after changing the time . The year will flash on the display screen . Press the ‘Prev’ (Ref .5) or ‘Next’ (Ref .6) buttons until the required year is displayed . To confirm the year press the ‘Enter’...
Instructions Guide Dual Alarm Setting Alarm 1/Alarm 2 Setting Press and hold the ‘Info/Menu’ button (Ref .1) . Use the ‘Prev/Next’ buttons (Ref .5/6) to choose your option . Choose “Alarm 1 Set” and press the ‘Enter’ button (Ref .7) . To turn the Alarm on, press the ‘Next’...
Instructions Guide To Turn off Alarm 1 or Alarm 2 Press and hold the ‘Info/Menu’ button (Ref .1) . Use the ‘Prev/Next’ buttons (Ref .5/6) to choose your option . Choose “Alarm 1 Set” and press the ‘Enter’ button (Ref .7) . To turn the Alarm off, press the ‘Next’...
Instructions Guide Other Functions Sleep Setting This enables you to programme the radio to switch off at a selection of set times up to 120 minutes from activation . Press and hold the ‘Info/Menu’ button (Ref .1) . Use the ‘Prev/Next’ buttons (Ref .5/6) to choose your option . Choose “Sleep Timer”...
Page 19
Instructions Guide System Reset Press and hold the ‘Info/Menu’ button (Ref .1) . Use the ‘Prev/Next’ buttons (Ref .5/6) to make your selection . Select “Factory Reset” and press the ‘Enter’ button (Ref .7) . The display screen will show “Factory Reset” Use the ‘Next’...
Technical Specifications and Warranty Technical Specifications Power Supply In-built Battery Mode FM (87 .5MHz – 108MHz) DAB/DAB+ (174-240MHz) Output Connector 3 .5mm Earphone Socket Aerial Integral Telescopic Aerial Warranty All products come with a standard 12 month warranty . All items must be registered on www.majorityradios.co.uk for the warranty to be valid .
Troubleshooting Guide Observation Potential cause/solution No sound The station is not tuned in . Fine tune the station . The volume is set to a low position . Increase the volume . Headphones may be connected . Disconnect the headphones . Buttons are not Turn off the unit and turn on after a few seconds .
IMPORTANT SAFETY INFORMATION 1 . Read these instructions . ADDITIONAL WARNINGS 2. Keep these instructions . Instructions are also The apparatus shall not be exposed to dripping or available for download at splashing and no objects filled with liquid, such as www.majorityradios.co.uk vases, shall be placed on apparatus .