Air Lift WirelessONE 25870 User Manual page 18

Troubleshooting Guide (cont.)
Error
Problem Code
System does 1
not exhaust
when
2
deflation is
commanded
3
4
Nothing -
happens when
the vehicle is
turned on
Nothing -
happens when
making an
adjustment with
the remote
18
Cause
Vehicle battery voltage is too low
(below 9 volts)
Vehicle battery voltage is too high
(above 18 volts)
Manifold temperature is too cold
Manifold temperature is too hot
If the ignition wire is not connected, the
system will only maintain a preset if the
vehicle starts moving or is connected to
the wireless controller or mobile app
When first powering on the wireless
controller, the Bluetooth connection is
established in the background. Changes
to the desired pressure can be made
while connecting, but the adjustment
command won't be sent until the Blue-
tooth connection is complete and signal
strength icon is visible in the upper left
corner of the screen
WirelessONE User Guide
Solution
Check the vehicle battery
Check the vehicle battery and charging system
Allow manifold to warm up
Allow manifold to cool down. Move manifold to location that
is not near heat sources
Connect the optional ignition wire if desired. Connect to the
manifold using the remote or mobile app to wake the system
up for quicker adjustments
Wait for the Bluetooth connection to complete. The
last adjustment will automatically be made once the
connection is established