[键入文字]
(6) MAINTENANCE
a) AUTO PROVISION
The equipment supports PnP, DHCP, and Phone Flash to obtain configuration parameters. They will be
queried in the following order when the equipment boots.
DHCP option → PnP server → Phone Flash
Field Name
Explanation
Auto Provision Settings
Show the current config file's version. If the version of configuration downloaded is
Current Config
higher than this, the configuration will be upgraded. If the endpoints confirm the
Version
configuration by the Digest method, the configuration will not be upgraded unless it
differs from the current configuration
Show the common config file's version. If the configuration downloaded and this
Common Config
configuration is the same, the auto provision will stop. If the endpoints confirm the
Version
configuration by the Digest method, the configuration will not be upgraded unless it
differs from the current configuration.
CPE Serial
Serial number of the equipment
Number
Username for configuration server. Used for FTP/HTTP/HTTPS. If this is blank the
User
phone will use anonymous
Password
Password for configuration server. Used for FTP/HTTP/HTTPS.
47 / 59