Controller Connection - Runco LS-3 Series Installation & Operation Manual

Connect a PC or home theater control/automation system (if present) to the RS-232 port
on the LS-3/LS-5; see Figure 3-12. Use a standard, 9-pin serial cable, wired
straight-through.
For more information about using this connection, refer to Serial Communications on
page 71.
to Automation/
Control System
or PC
Figure 3-12. RS-232 Control System Connection
Runco LS-3/LS-5 Installation/Operation Manual
5 4 3 2 1
9 8 6
7
2 Transmit Data
3 Receive Data
5 Ground
(none of the other pins are used)
29
Installation
RS-232 Controller
Connection