Removing The Spark Module & Power Cord - KitchenAid KGCV465MSS Technical Education

REMOVING THE SPARK MODULE & POWER CORD
WARNING
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all parts and panels
before operating.
Failure to do so can result in
death or electrical shock.
Shut off gas supply line valve
before servicing.
Check all gas line connections
and replace all parts and panels
before operating.
Failure to do so can result in
explosion, fire or other injury.
1. Turn off gas supply and disconnect power
to the cooktop.
2. Remove the control and front panels from
the unit (see pages 4-6 and 4-7 for the
procedures).
Power Cord
Spark Module
3. To remove the spark module:
a) Disconnect the wire connectors from
the spark module terminals (see the
wiring photo at the top of the right
column).
b) Remove the two hex-head screws from
the spark module and remove it from
the unit.
Fire Hazard
Screw (1 of 2)
Black
White
4. To remove the power cord:
a) Cut or loosen the wire tie, and discon-
nect the black power cord wire from the
spark module terminal.
b) Disconnect the other black power cord
wire from the harness connector.
c) Remove the screw and disconnect the
green ground wire from the chassis.
d) Remove the strain relief from the chas-
sis and remove the power cord from the
unit.
Wire Tie
4-10
Spark Module
Orange Dark Light
Brown
Brown
Green Yellow
Remove Power
Cord Strain Relief
Ground Wire Screw
Black Wire
Connector
Black Wire
Light
Brown