c) Lift the burner base from its bracket as
far as the bottom gas line will allow, and
then remove the gas line.
Bottom Gas Line
5.
To remove the ignitor from the
TripleTier
a) Remove the burner base from the
bracket (see step 4).
b) Slide the clip off the ignitor and remove
the ignitor from the base.
Slide Clip Off Ignitor
Ignitor Wire From
Spark Module
c) Remove the control and front panels
from the unit (see pages 4-6 and 4-7 for
the procedures).
d) Disconnect the orange ignitor wire from
the spark module terminal.
Orange Wire Connector
4-5
Crown burner base:
Spark Module