Download  Print this page

Removing The Power Supply Wiring - KitchenAid KECC508MBL Technical Education

Hide thumbs

Advertisement

REMOVING THE POWER SUPPLY WIRING

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Disconnect power to the cooktop.
2.
Remove the cooktop glass from the burner
base (see page 4-2 for the procedure).
3.
Remove the hex nuts from the white, red,
and black power supply wires and remove
the wires from the terminal block studs.
4.
Remove the hex-head screw from the
green ground wire.
Green (Ground) Power Supply Wire
Terminal Block
White
Red &
Power Supply Wires
5.
Disconnect the other ends of the black,
red, white, and green wires from the house
junction box.
Black
4-6
6.
Remove the two mounting screws from
the 90° connector and pull the metal con-
duit out of the connector and off the wires.
90° Connector & Screw (1 of 2)
7.
Pull the black, red, white, and green wires
out of the connector and burner box.
WARNING
Electrical Shock Hazard
Connect green ground wire to ground
screw.
Failure to do so can result in death or
electrical shock.
8.
Install the new power supply wires in the
conduit and route them into the burner
box, then secure the conduit to the con-
nector.
9.
Connect the green ground wire to the
burner box with its hex-head screw.
Conduit
Pull Conduit Off Wires

Advertisement

loading

  Related Manuals for KitchenAid KECC508MBL

This manual is also suitable for:

Kecc568mbl