KitchenAid KGCV465MSS Technical Education page 24

REMOVING THE TripleTier
IGNITION SWITCH AND GAS VALVE
WARNING
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all parts and panels
before operating.
Failure to do so can result in
death or electrical shock.
Shut off gas supply line valve
before servicing.
Check all gas line connections
and replace all parts and panels
before operating.
Failure to do so can result in
explosion, fire or other injury.
1. Turn off gas supply and disconnect power
to the cooktop.
2. Remove the knobs from the gas valve
stems.
3. Remove the two screws from the control
panel and remove the panel from the unit.
Screw
Control Panel
Fire Hazard
Screw

CROWN BURNER
4. Remove the rubber shield from the

TripleTier Crown burner gas valve.
Rubber Shield
5. To remove the TripleTier
ignition switch:
a) Disconnect the wire connectors from
the ignition switch terminals.
b) Remove the two screws from the igni-
tion switch and remove the switch from
the bracket.
Ignition Switch & 2 Screws
4-8

Crown burner
Switch Wires