Installation Information; L.p. Gas Conversion - KitchenAid KGCV465MSS Technical Education

INSTALLATION INFORMATION

WARNING
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all parts and panels
before operating.
Failure to do so can result in
death or electrical shock.
Shut off gas supply line valve.
Make all conversions before
turning gas supply valve back on.
Failure to follow these instructions
can result in explosion, fire, or
other injury.
NOTE: Gas conversion from natural to L.P.
gas must be done by a qualified installer.

L.P. GAS CONVERSION

Fire Hazard
To convert the cooktop for use with L.P. gas,
perform the following steps.
1. Turn off gas supply to the cooktop.
2. Disconnect power to the cooktop.
3. Use a screwdriver and remove the access
cap on the gas distribution valve.
Gas Distribution
Valve
4. Turn the access cap so that the letters L.P.
are facing up and then reinstall the cap on
the valve.
NAT Position
2-1
Access Cap
L.P. Position