Omron NT631 Operation Manuals page 522

Input of Numeric Values and Character Strings
Inputting Numeric Values Using the Temporary Input Field
[Setting]
The following describes the procedure for inputting a numeric using a "temporary
input field" which is registered for a window. The term "temporary input field"
means a numeric key type numeral setting input field registered for a window. It is
used as a "temporary input field" before the input is confirmed.
When a temporary input field is used, it is possible to input a numeric value while
leaving a numeric value which was active before the input in the numeral setting
input field on the base screen.
Here, the explanation concentrates on how to use a "temporary input field" in a
window. For the numeric value input procedure (page 505) and the procedure for
specifying the numeral setting input field (page 509, 511) and for opening the win-
dow (page 513), refer to the explanation for the numeric value input method given
previously.
Input
12345678
5322
7 8 9
4 5 6
1 2 3
"
0 .
Window
When creating a screen using the Support Tool, register the following elements for
the screen.
- Numeral setting input field (numeric key type)
- Touch switch "input – key control"
@ ENT or
The following keys can be registered if necessary.
@ HOME or ↑, ↓, ←, →,
@ CLR
@ CA
@ BS
@ DEL
@ A, "
Temporary input field
(necessary for confirming the input)
, (necessary for specifying an input field)
(for clearing the numeric value being input)
(for canceling the input)
(for deleting a character located
immediately before the input cursor)
(for deleting a character located
immediately after the input cursor)
(for moving the input cursor)
Section 8-7
515