Omron NT631 Operation Manuals page 486

Programmable terminal

Hide thumbs Also See for NT631:

Table of Contents

Display and Control of Windows

Opening/Closing a Window by Pressing a Touch Switch That Has the "Input Key – Keyboard" Function

If this method is used, the specified window can be opened and closed by opera-

tion at the NT631/NT631C.

By this method, only the local window can be controlled.

No changes after pressing [CLOSE]

Opening window 1

Opening/closing window 2

When creating a screen, set the "input key – keyboard" function which opens/

closes a window for the touch switch and specify the window screen number (key-

board screen number) of the window to be opened. Register the window number

for the screen.

The window screen numbers that can be set are:

0001 to 3999: Screen (keyboard screen) No. 1 to No. 3999

If the specified number is not the number of a window screen, no window opens.

(1) Press a touch switch that has the "input key – keyboard" function to open/

close a window.

The window set for the touch switch opens.

When a window control area is allocated to a host, window screen number and the

bottom left coordinate of the window which is opened are notified to the window

control area. (Refer to page 484)

Also, window open status bit of the corresponding window type in PT status notify

area goes ON. (Refer to page 484)

Pressing [SCREEN 1]

Pressing [CLOSE]

Pressing [SCREEN 2]

Pressing [CLOSE]

No changes after pressing [SCREEN 1]

Chapters

Table of Contents