Omron NT631 Operation Manuals page 262

NT631/NT631C Screen
Reference
254
S Load Local1, Load Local2
Specify whether or not a window (Local1, Local2) pops up at the same time the
screen is displayed by screen switching. Set the window screen number to be
displayed when you check these attribute.
For details of a window, refer to 7-14 "Window Function" (page 427), and for de-
tails of using method of a window, refer to 8-4 "Display and Control of Windows"
(page 477)
- A window can also be opened, closed or moved by the operation at Window
control area (refer to page 480)
- To control (open close or move) a window, follow the methods below.
@ Register "Input key-Window/Keyboard" touch switch or "Window Move" touch
switch on ascreen. (refer to page 478, 480)
@ Register "Cursor Move" touch switch which has a window open function. (refer
to page 479)
@ Operate Window control area from the host. (refer to page 480)
@ Switch to the screen which has "Load Local1" (keyboard) or "Load Local2"
screen attribute.
Section 7-1