Omron NT631 Operation Manuals page 160

Operation Modes and the System Menu
Items in the System Menu
Functions of the System Installer Mode
152
The items displayed in the system menu and their functions are as follows.
Menu Item
Quit Clear the System Menu screen and return to the RUN mode
screen.
Transmit Mode Display the Transmit Mode screen to allow transmission for
screen data between the Support Tool and the NT631/NT631C.
For details on transmission of screen data, refer to 6-6 "Transmit-
ting the Screen Data" (page 169).
Maintenance Mode Display the Maintenance Mode menu to allow system mainte-
nance of the NT631/NT631C, and various NT631/NT631C set-
tings.
Expansion Mode Display the Expansion Mode menu to allow selection of the ex-
pansion functions embedded in the NT631/NT631C.
Among the expansion functions of the NT631/NT631C is the
Programming console function, which allows the NT631/NT631C
to be used as the programming console for a CS1 series CS1G/
CS1H C-series CPM1, CQM1, C200HX/HG/HE, or SRM1, and
the version display function which displays the version of system
program. For details on the programming console function, refer
to 6-12 "Programming Console Function" (page 237).
The following functions can be executed in the System Installer mode.
S Setting the display language
S Clearing and installing system programs
S Disabling/enabling display of the System Menu.
S Disabling/enabling writing to the screen data memory
S Clearing screen data
For details on these functions, refer to 6-5 "Operations in the System Installer
Mode" (page 164).
Section 6-3
Function