Using The Remote Control - Cochlear Baha Remote Control 2 Quick Manual

Cochlear Baha
™ ®
Quick guide for Baha

Using the Remote Control 2

Turning your Remote Control 2 ON and OFF
To turn your Remote Control 2 ON slide the switch
on the side of the Remote Control 2 down to the ON
position. A white "I" icon will be visible on the base of
the switch and the display will turn on.
Activate streaming
If your sound processor is
paired with more than one
wireless accessory press once,
twice, or three times to toggle
between the accessories. If you
cannot connect to your wireless
accessory, move closer to it and
try again.
A
Connected to streaming
device.
A
No streaming device found.
Support
For full details about the Cochlear Baha Remote Control 2, please refer to the User Manual.
For full details about the Cochlear Baha 4 Sound Processor, please refer to the User Manual part A.
For further support and videos, visit the Cochlear website: www.cochlear.com
Remote Control 2
To turn your Remote Control 2 OFF, slide the ON/
OFF switch up to the OFF position.
Switching between sides
Select your left or right sound
processor if you use 2 sound
processors.
A
Left and right hearing
instrument volume selected.
A
Left and right streaming
volume selected.
users
®
Deactivating streaming
Home: Stop streaming and return
to program 1 and default volume
settings
Stop streaming and return to the
last used program and volume
settings
Remote Control 2 displays
The batteries are low in the
Baha Sound Processor and need
to be replaced:
Everyday
In the left sound processor.
Everyday
In the right sound processor.
Everyday
The battery is low in the
Remote Control 2 and need
to be charged.
Everyday TV
The Phone Clip is active.