Cochlear Baha Remote Control 2 Quick Manual

Cochlear Baha Remote Control 2
™ ®
Quick guide for Baha
Benefits of your Cochlear Baha Remote Control 2
Allows you to discreetly adjust your Baha 4 Sound Processor
Provides large buttons for simple volume or programme changes
Allows you to monitor your or your child's sound processor
Makes streaming to other wireless accessories easy
Note: The Baha Remote Control 2 can be paired to two Baha 4
Sound Processors for those with a bilateral fitting.

Product overview

Display
Home button
ON/OFF control

Charging the Battery

Before using your Remote Control 2, you need to fully charge the battery. To charge it,
plug in the charging cable as shown to the right. Then plug the other end into a power
outlet. During charging the bars in the battery meter will be showing one, two and
three bars continuously. When fully charged all three bars will be shown continuously.
users
®

Getting Started

Check with your hearing healthcare
professional whether your sound
processor has been paired with your
Remote Control 2. Pre-paired sound
processors do not need to be paired
again. If your sound processor is
Program change
not pre-paired, instructions on how
to easily pair it with your Remote
Control 2 are on the last page of
Sound processor
this guide.
microphone mute
Streaming
(optional TV
Streamer or Mini
Microphone)
Select left Sound
Processor only
Pairing button
Increase volume
Select right Sound
Processor only
Decrease volume