Cochlear Baha remote control 2 Quick Manual

Quick Guide for Baha 5 Sound Processor Users
®
Cochlear Baha
™
Benefits of Your Cochlear Baha Remote Control 2
• Allows you to discreetly adjust your Baha sound processor
• Provides large buttons for simple volume or program changes
• Allows you to monitor your or your child's sound processor
• Makes streaming to other wireless accessories easy
Note: The Baha Remote Control 2 can be paired to two
Baha 5 Sound Processors for those with a bilateral fitting.

Product Overview

Display
Home button
ON/OFF
control
Select left Sound
Processor only
Pairing button

Remote Control 2

®
Program change
Sound processor
microphone mute
Streaming (optional
TV Streamer or Mini
Microphone)
Increase volume
Select right Sound
Processor only
Decrease volume

Getting Started

Pre-paired sound processors do not need to be paired
again. If your sound processor is not pre-paired,
instructions on how to easily pair it with your Remote
Control 2 are on the last page of this guide.

Charging the Battery

Before using your Remote Control 2, you need to fully
charge the battery. To charge it, plug in the charging
cable as shown to the right. Then plug the other end
into a power outlet. During charging the bars in the
battery meter will be showing one, two and three bars
continuously. When fully charged all three bars will be
shown continuously.