Cochlear Baha Remote Control 2 Quick Manual

Cochlear Baha Quick Guide
®
™
Cochlear Baha
™
Benefits of your Cochlear Baha Remote Control 2

Product overview

Display
Home button
On/Off control

Charging the battery

Before using your Remote Control 2, you need to
fully charge the battery. To charge it, plug in the
charging cable as shown to the right. Then plug the
other end into a power outlet. During charging the
bars in the battery meter will be showing one, two
and three bars continuously. When fully charged all
three bars will be shown continuously.
Remote Control 2
®

Getting started

Pre-paired sound
processors do not need
to be paired again. If your
sound processor is not
pre-paired, instructions
on how to easily pair it
Program change
with your Remote Control
2 are on the last page of
Sound processor
microphone mute this guide.
Streaming
(optional TV
Streamer or Mini
Microphone)
• Allows you to discreetly adjust your Baha 4 Sound Processor
• Provides large buttons for simple volume or program changes
• Allows you to monitor your or your child's sound processor
• Makes streaming to other wireless accessories easy
Note: The Baha Remote Control 2 can be paired to two Baha 4 Sound Processors
for those with a bilateral fitting.
Select left Sound
Processor only
Pairing button
Increase volume
Select right Sound
Processor only
Decrease volume