Gefen EXT-UHDV-HBTLS-TX User Manual page 26

OSD
HDCP Menu
Sets the HDCP operating mode for the HDMI input. The following HDCP operating modes
are available:
HDCP Active: This HDCP operating mode will follow the detected HDMI input's HDCP
encryption level, if present. Acceptable HDCP encryption levels include HDCP 2.2 and
HDCP 1.4. If the connected HDMI source is unencrypted, HDCP encryption will not be
enforced on the Receiver's HDMI output.
HDCP On: A minimum of HDCP 1.4 encryption will always be enforced on the Receiver's
HDMI output,m regardless of whertheer the iunput is encrypted or not. If HDCP encryption
is detected on the HDMI input device, the same level of encryption will be active and
enforced on the Receiver's HDMI output.
Back: Go back to the previous layer of the OSD.
Note: HDCP 1.4 will also be active on the Receiver's output if the VGA input is active and
the HDCP operating mode is set to "HDCP On".
26