Gefen EXT-UHDV-HBTLS-TX User Manual page 15

Controls, Connectors, and Indicators
ID Name
5 RS-232 Port
6 IR In/Ext
7 IR Out
8 HDMI Out
9 Line Out
Description
This port can be used for extending
2-way RS-232 communications between
the Sender and the Receiver, for remote
control of the Sender, for Gefen Syner-G™
interface using an Rs-232 connection with
a computer. Connect Tx, Rx, and Ground
from an automation control device or an
RS-232 device-to-be-controlled, using the
removable 3-pin "Captive Screw" Phoenix
connector. Please note that The Sender and
Receiver's Tx, Rx, and Ground pin-outs for
their Phoenix connectors are different. To
ensure proper operation, please follow the
pin-out of each connector as printed on each
unit's enclosure.
3.5mm mini-stereo jack. Connect an IR
Extender (Gefen part no. EXT-RMT-EXTIRN)
to this port. Alternatively, connect a 3.5mm
mini-stereo connector from this port to the
output of an automation system with an
electrical IR output.
Connect an EXT-IREMIT IR Emitter (sold
separately) from this port to the IR sensor of
the device to be controlled.
Use a Gefen HDMI cable to connect an
HDMI display to this port.
This port provides analog Left and Right
channels of audio de-embedded from
the HDMI signal, for use with outboard
amplification. Connect a 3.5mm stereo
audio cable from this port to the analog
stereo input of your amplifier or processor.
15