Table of Contents
Advertisement
Import / export and firmware update with
USB flash drive
Import / Export and firmware update with USB flash drive
Backup or copy the picture modes and monitor settings to a USB flash drive connected to the SENS/MEM port.
You can also update the firmware of the monitor.
The USB Flash Drive OSD will be shown when you select "Import/Export" (see
flash drive into the SENS/MEM port.
NOTE:
This function is not available when using the USB ports from the USB hub. This function will only work in the
SENS/MEM port.
Select a function on the menu and follow the instructions on the OSD message.
Export monitor settings
Exports the monitor settings to the USB memory for back-up and copy. Select a type of export items.
Current Picture mode:
All Picture modes:
All monitor settings:
The export file name is automatically set to avoid duplication.
Import monitor settings
Imports the exported setting file and overwrites the current OSD settings.
Only the OSD settings, which are contained in the exported file are overwritten.
Please put the exported files on the root folder of the flash drive.
If you set the IP address of the monitor manually, please make sure not to duplicate the IP address.
NOTE:
The monitor detects up to 15 files, so do not put more than 15 files on the drive.
Update Firmware
Updates the firmware of the monitor. Please put the firmware updating file on the root folder of the USB drive in advance.
The LED blinks green during firmware updating. When the update is complete, the monitor restarts automatically. After restart,
turn off and on the main power switch.
Remove USB Drive and Exit
Prepares the USB flash drive for disconnect and closes the OSD menu.
Please use this function before removing the USB flash drive from the monitor.
NOTE:
The supported file system format of the USB flash drives is FAT32.
The "Import/Export" function does not export the dependent settings of each monitor, i.e. calibration status.
The export file can be imported to other PA271Q monitors. The latest compatible models for "Import/Export"
functions will be on the NEC Display Solutions website.
Setting the time clock is required to create an export file. Follow the instructions on the OSD menu and set the time.
Once the time is set, the monitor counts automatically while the AC power is active.
Visit the NEC Display Solutions website for information on firmware releases.
Export the picture mode settings of the current active window.
Export all picture modes settings.
Export all OSD settings.
page
22) on the OSD menu or connect a USB
English-27
Hide quick links:
Advertisement
Table of Contents
