NEC MultiSync PA271Q User Manual page 24

Customize
Hot key
Key 1-8 Customizes seven keys on the front bezel by assigning Picture modes or other functions to the keys for easy
access. The following functions can be assigned:
- Picture modes.
- Video input connectors.
- Some OSD menu shortcuts.
- Other function1: USB hub upstream, Luminance, Volume setting OSD.
- Other function2: Toggle functions like Emulation, Sound mute.
NOTE: Key 1 is the Menu Key and cannot be changed.
Input name
Input name You can create a name for the input currently being used. Max: 14 characters, including space, A-Z, 0-9, and
some symbols.
Number of Picture modes
Number of Picture Sets the maximum number of selectable "Picture mode".
modes
LED indicator
LED brightness Controls the brightness of the LED on the front bezel of the monitor.
LED color Selects the color of LED on the front bezel from Blue, Green or Custom.
Custom1: Change LED color along with the selected "Picture mode".
Custom2: Change LED color along with the status of "Picture mode". (Default or Emulation on or Edited.)
Custom3: Change LED color by the selected video input.
OSD lock out
OSD lock out Prevents the monitor from being controlled by the OSD menu or the hot key. Touch the [Key1] and [Key3]
simultaneously for a few seconds to unlock.
Disable: All OSD menu and hot key actions are available for normal operation.
Enable:
Custom: Locks all OSD menu actions. Hot key actions are available for normal operation.
Tools
Area marker
Area marker Shows a marker by a frame or line.
NOTE: When a line marker is displayed for a long time, LCD panel may have image sticking phenomena.
To avoid it a frame marker is recommended.
Size Adjusts the size of the marker.
Aspect Adjusts the aspect ratio of the marker.
Color Selects the color of a line marker or the brightness of a frame marker.
Import / Export
Import / Export Imports or exports the settings of your display to a USB memory (See
NOTE:
- The Import function will overwrite the current monitor settings. If needed, backup the current settings using the
- Some monitor specific settings, such as calibration records, are not exported.
- If the IP address is set manually, make sure it is a unique address and there is no duplicate on the network.
Information
Monitor information Shows the model name, serial number, input signal and audio information for your monitor.
SpectraView engine status Shows the status of internal sensors and the calibration information for your monitor.
USB information Shows the USB hub and USB-C information.
System information Shows the firmware version, SpectraView engine status, hours running, carbon savings, carbon usage and MAC
address of your monitor.
Hours running: Show total running time.
Carbon savings: Shows the estimated carbon saving information in kg-CO2. The carbon footprint factor in the
carbon saving calculation is based on the OECD (2008 Edition).
Carbon usage: Shows the estimated carbon usage information in kg-CO2. This is an arithmetic estimation, not an
actual measurement value. This estimation is based on the monitor settings only and does not account for any
connected devices.
Locks all OSD menu and hot key actions.
export function before importing new settings.
English-22
page 27).